Product image

MORE VIEWS

  • Product image

HID VERTX EVO V1000 Networked Controller

#EVO V1000 (71000BEP0N01A)

  • The VertX EVO™ V1000 is a networked access controller with a multi-door access control panel. It reduces the burden on corporate Local Area Networks (LANs) by connecting up to 32 door controllers using only one IP address.
  • The high performance platform increases door uptime while the master controller minimizes corporate LAN overhead by providing access control decisions for up to 64 readers.
  • VertX EVO V1000 makes all online door decisions, input monitoring and output control for all connected interface modules, including VertX® V100 (door interface), V200 (input monitor) and V300 (output control).
  • The V1000 has two on-board inputs and outputs for local input point monitoring and auxiliary output control, and is powered by a local power supply (12 or 24 VDC).

Features

  • Provides a complete and fully functional hardware/firmware infrastructure for access control software host systems.
  • Enables the replacement of head end software without visiting the access control panel, reducing change out costs.
  • Stores a complete access control and configuration database for up to 32 Reader Interfaces (up to 64 doors) and 250,000 cardholders.
  • Connects to the host and other devices on a TCP/IP network.
  • Receives and processes real-time commands from the host software application.
  • Reports all activity to the host; reports supervised inputs/alarms with 255 priorities.
  • Provides fully functional offline operation when not actively communicating with the host access control software application, performing all access decisions and event logging.
  • Access control system interfaces with combinations of devices with a maximum of 32. 
    Devices are:
    • VertX V100 - Door/Reader interface (up to 2 doors/2 readers or 1 door/2 readers)
    • VertX V200 – Input monitor interface (up to 16 monitor points per device)
    • VertX V300 – Output control interface (up to 12 control relays per device)

Download:

VertX EVO™ V1000 Networked Controller DATASHEET

VertX EVO V1000 Installation Guide 

 

CARD SIZE

5.8" W x 4.825 "H x 1.275" D (147,32 mm x 122,55 mm x 32,38 mm)
12.4 oz (.35 kg)

Communication

Ethernet (10/100), RS485 (half duplex)

Operating Environment

32° to 122° F (0° to 50° C)
Operating Humidity: 5% to 95% relative, non-condensing

Certificate

UL294 (USA), CSA 205 (Canada), Lớp FCCA (USA), ICES-003 Loại A (Canada), CE Mark EN 301 489-3 EN, 55022 EN 50130-4 (EU), C-Tick AS / NZS CISPR 22 ( New Zealand) và Korea (KCC)

Users (1 card/1 user)

250,000

Events

1,000,000

Number of default doors

2

Maximum added doors

64

Expand input mainboard

Yes

Expand the output mainboard

Yes

VDC power

12-24 VDC

PoE power

No

Optional integrated reader

No

API/SDK

Yes
  • The VertX EVO™ V1000 is a networked access controller with a multi-door access control panel. It reduces the burden on corporate Local Area Networks (LANs) by connecting up to 32 door controllers using only one IP address.
  • The high performance platform increases door uptime while the master controller minimizes corporate LAN overhead by providing access control decisions for up to 64 readers.
  • VertX EVO V1000 makes all online door decisions, input monitoring and output control for all connected interface modules, including VertX® V100 (door interface), V200 (input monitor) and V300 (output control).
  • The V1000 has two on-board inputs and outputs for local input point monitoring and auxiliary output control, and is powered by a local power supply (12 or 24 VDC).
  • The V100 Door / Reader Interface connects two access control card readers via Wiegand or Clock-and-Data interface controlling either one or two doors.
  • The V100 features on-board flash memory, allowing program updates to be downloaded via the network. The V100 connects to the V1000 through a high speed RS-485 network.
  • The V1000, in turn, communicates with the system host via industry standard TCP/IP protocol over 10/100 Mbps Ethernet or the Internet. This architecture minimizes the impact on corporate LANs by using only one TCP/IP address for every 32 interfaces and by handling low-level transactions on the RS-485 network.
  • The HID VertX® products provide a complete and fully featured hardware/firmware infrastructure for access control software host systems.
  • The V200 input monitor interface connects up to 16 supervised input circuits. Each input point monitors and reports normal, off-normal, and alarm states.
  • The V200 features on-board flash memory, allowing program updates to be downloaded through the network. The V200 connects to the V1000 via a high speed RS-485 network.
  • The V1000, in turn, communicates with the system host via industry standard TCP/IP protocol, over 10/100 Mbps Ethernet, or the Internet. This architecture minimizes the impact on corporate LANs, by using only one TCP/IP address for every 32 interfaces, and by handling low-level transactions on the RS-485 network.
  • The HID VertX products provide a complete and fully featured hardware/firmware infrastructure for access control software host systems.
  • The V300 output control interface contains 12 latching Form-C relays, which can connect up to 12 devices controllable by simple contact closures, such as logic inputs for process equipment, HVAC and elevator control panels, CCTV switchers, etc. Loads exceeding 2 A @ 30 VDC should be controlled via interposing relays.
  • The V300 features on-board flash memory, allowing program updates to be downloaded via the network. The V300 connects to the V1000 through a high speed RS-485 network. The V1000 communicates with the system host via industry standard TCP/IP protocol over 10/100 Mbps Ethernet or the Internet. This architecture minimizes the impact on corporate LANs, by using only one TCP/IP address for every 32 Interfaces, and by handling low-level transactions on the RS-485 network.
  • The HID VertX products provide a complete and fully featured hardware/firmware infrastructure for access control software host systems.

CUSTOMER REVIEWS

Reviews and comments of: HID VERTX EVO V1000 Networked Controller

1.2 out of 5 rate
review star
100 reviews

1 star
96
2 star
0
3 star
0
4 star
0
5 star
4

WRITE YOUR OWN REVIEW

You're reviewing: HID VERTX EVO V1000 Networked Controller

Rate


GUIDE CENTER

We’ll help you learn everything you need to know about ID card systems, access control systems from how the itemts work to important advice when setting up a new system, card templates, case studies, and more.